upr000128 107

HOW TO SET UP AND USE KNOCK DOWN SHANNON TRANSFER CASES REG, U. S. pAT.OFr.. 2 Open the “ book” out flat. T h e bottom of the “ book” bears a . metal plate, with grooves, on either side. Insert the arch in the grooves, from the back of the plate T h e back is that part of the plate bearing a raised nib. Be sure to insert front of arch first. Illustration shows this clearly. When way in, the metal " n ib ” holds arch in place. ?| As you unpack the case, you will find three separate items; vis.: I a the “ book," the arch and the outside cover. 4 N ow bend in the two large flaps, with the one bearing • the metal fasteners, outside. These fasteners must be bent at right angles, as indicated by arrows. Press the sides of the cover together, until the bent fasten­ers will enter the two corresponding slots. 3 N ow take the cover, and form it into the shape of a box. Push . the side flaps way in, as shown. These must be bent in as far as possible, for reasons which will be made clear by illustra­tion % S . MAKERS OF “ Y and E” FILING DEVICES AND OFFICE SYSTEMS WOOD AND STEEL FORM 7192 10M 2-23______________________________________________________________________ Then, inserting one hand inside the cover, bend or clinch the metal fasteners flat against the end. This cannot be done unless the two side flaps referred to in para­graph 3 are folded flat against the inside o f the cover. A fter clinching the fasteners, the side flaps should be pushed down, and the cover is ready for use. Insert the “ book” in the cover and you have a strong, con­venient and dust-proof Transfer Case. Mil-#-! Main Factories and Executive Offices R O C H ES T E R , N. Y.